Best Suited to large size single story homes with large family. this pump has enough pressure capacity for your garden as well.
The HP Series Pressure Systems, consist of an HP pump
fitted with a Torrium2 controller. The Torrium2 is supplied
connected electrically to the HP pump motor for:
• Easy non-tradesmen installation and assembly
• Positive safety under varied weather conditions
The combination of the high pressures supplied by the HP
pump and constant flow control provided by the Torrium2,
enables consumers to enjoy the benefits of a strong
comfortable shower from a pump that does not cycle, plus
the reliability of adaptive technology.
The complete HP Pressure System is compact and quiet
providing for:
• Easy installation, especially where space is at a premium
• Non-intrusive operation, for consumer enjoyment
All parts of the entire system that are in contact with the
water are manufactured from safe, corrosion resistant
materials for:
• Consumer confidence that their water supply will be as
good coming out as it was going into the system
• Ability to use the HP pressure system on a variety of
water qualities
Home Pressure Systems
APPLICATIONS
Ideal for pumping clean, non-volatile liquids without
fibres or solids in such applications as:
> Household water supply
> Irrigation
> Water transfer
> Washing systems
> Pressure boosting
PUMP
• Reliable twin stage impeller design
• All stainless steel construction for reliability and the
ability to pump hot water up to 50°C
• Carbon/Ceramic mechanical seal for reliable pump
operation
MOTOR
• TEFC motor constructed from corrosion resistant
materials
• IP55 international protection rating for a high level of
resistance to dust and liquid entry
• Voltage variants:
• 220-240V, 50Hz, 2 pole
• 220V, 60Hz, 2 pole (/P models)
• Class F insulation
• Higher than normal 50°C ambient temperature rating
for longer life and improved tolerance to voltage
variations for peace of mind, even on the hottest days.
• Protected against both high operating temperature
and high current draw by a built-in, automatically
re-setting, thermal overload
• Permanently split P2 ‘fail safe’ capacitor design
• Motor and pump are designed for frequent starts
